Interface Cohesive Elements to Model Matrix Crack Evolution in Composite Laminates
AffiliationUniversity of Chester; University of Sheffield; University of Manchester
MetadataShow full item record
AbstractIn this paper, the transverse matrix (resin) cracking developed in multidirectional composite laminates loaded in tension was numerically investigated by a finite element (FE) model implemented in the commercially available software Abaqus/Explicit 6.10. A theoretical solution using the equivalent constraint model (ECM) of the damaged laminate developed by Soutis et al. was employed to describe matrix cracking evolution and compared to the proposed numerical approach. In the numerical model, interface cohesive elements were inserted between neighbouring finite elements that run parallel to fibre orientation in each lamina to simulate matrix cracking with the assumption of equally spaced cracks (based on experimental measurements and observations). The stress based traction-separation law was introduced to simulate initiation of matrix cracking and propagation under mixed-mode loading. The numerically predicted crack density was found to depend on the mesh size of the model and the material fracture parameters defined for the cohesive elements. Numerical predictions of matrix crack density as a function of applied stress are in a good agreement to experimentally measured and theoretically (ECM) obtained values, but some further refinement will be required in near future work.
CitationShi, Y., Pinna, C., Soutis, C. (2014). Interface cohesive elements to model matrix crack evolution in composite laminates. Applied Composite Materials, 21(1), 57–70
JournalApplied Composite Materials
Except where otherwise noted, this item's license is described as http://creativecommons.org/licenses/by-nc-nd/4.0/