• Active Power and DC Voltage Coordinative Control for Cascaded DC–AC Converter With Bidirectional Power Application

      Tian, Yanjun; Chen, Zhe; Deng, Fujin; Sun, Xiaofeng; Hu, Yanting; University of Chester (IEEE, 2015-10)
      Two stage-cascaded converters are widely used in dc–ac hybrid systems to achieve the bidirectional power transmission. The topology of dual active bridge cascaded with inverter DABCI) is commonly used in this application. This paper proposes a coordinative control method for DABCI and it is able to reduce the dc-link voltage fluctuation between the DAB and inverter, then reduce the stress on the switching devices, as well as improve the system dynamic performance. In the proposed control method, the DAB and inverter are coordinated to control the dc-link voltage and the power, and this responsibility sharing control can effectively suppress the impact of the power variation on the dc-link voltage, without sacrificing stability. The proposed control method is also effective for DABCI in unidirectional power transmission. The effectiveness of the propose control has been validated by both simulations and experiments.
    • Assessment of Multi-Domain Energy Systems Modelling Methods

      Stewart, M.; Counsell, M. J.; Al-Khaykan, A.; University of Chester (World Academy of Science, Engineering and Technology, 2017)
      Emissions are a consequence of electricity generation. A major option for low carbon generation, local energy systems featuring Combined Heat and Power with solar PV (CHPV) has significant potential to increase energy performance, increase resilience, and offer greater control of local energy prices while complementing the UK’s emissions standards and targets. Recent advances in dynamic modelling and simulation of buildings and clusters of buildings using the IDEAS framework have successfully validated a novel multi-vector (simultaneous) control of both heat and electricity approach to integrating the wide range of primary and secondary plant typical of local energy systems designs including CHP, solar PV, gas boilers, absorption chillers and thermal energy storage, and associated electrical and hot water networks, all operating under a single unified control strategy. Results from this work indicate through simulation that integrated control of thermal storage can have a pivotal role in optimizing system performance well beyond the present expectations. Environmental impact analysis and reporting of all energy systems including CHPV LES presently employ a static annual average carbon emissions intensity for grid supplied electricity. This paper focuses on establishing and validating CHPV environmental performance against conventional emissions values and assessment benchmarks to analyze emissions performance without and with an active thermal store in a notional group of non-domestic buildings. Results of this analysis are presented and discussed in context of performance validation and quantifying the reduced environmental impact of CHPV systems with active energy storage in comparison with conventional LES designs.
    • Atomic and vibrational origins of mechanical toughness in bioactive cement during setting

      Tian, Kun V.; Yang, Bin; Yue, Yuan-Zheng; Bowron, Daniel T.; Mayers, Jerry; Donnan, Robert S.; Dobo-Nagy, Csaba; Nicholson, John W.; Greer, A. Lindsay; Chass, Gregory A.; Greaves, G. Neville; Fang, De-Cai; Semmelweis University; University of Chester; Queen Mary University of London (Nature Publishing Group, 2015-11-09)
      Bioactive glass ionomer cements (GICs) have been in widespread use for ~40 years in dentistry and medicine. However, these composites fall short of the toughness needed for permanent implants. Significant impediment to improvement has been the requisite use of conventional destructive mechanical testing, which is necessarily retrospective. Here we show quantitatively, through the novel use of calorimetry, terahertz (THz) spectroscopy and neutron scattering, how GIC’s developing fracture toughness during setting is related to interfacial THz dynamics, changing atomic cohesion and fluctuating interfacial configurations. Contrary to convention, we find setting is non-monotonic, characterized by abrupt features not previously detected, including a glass–polymer coupling point, an early setting point, where decreasing toughness unexpectedly recovers, followed by stress-induced weakening of interfaces. Subsequently, toughness declines asymptotically to long-term fracture test values. We expect the insight afforded by these in situ non-destructive techniques will assist in raising understanding of the setting mechanisms and associated dynamics of cementitious materials.
    • Bacillus Spores and Their Relevant Chemicals Studied by Terahertz Time Domain Spectroscopy

      Tang, Jianhua; Yang, Bin; Llewellyn, Ian; Cutler, Ronald R.; Donnan, Robert S.; Queen Mary University of London; University of Bolton (Elsevier, 2013-12-28)
      Terahertz Time Domain Spectroscopy has been used to investigate 0.2 to 2.2 terahertz (THz) transmission responses of Bacillus spores and their related chemical components. Whilst no THz signatures could be clearly associated with either sporulated cells or their chief chemical components, differing degrees of signal attenuation and frequency-dependent light scattering were observed depending on spore composition and culture media. The observed monotonic increase in absorption by spores over this THz spectral domain is mainly from Mie scattering and also from remnant water bound to the spores.
    • Comparing Terahertz transmission response on pH-dependent apomyoglobin proteins dynamics with circular dichroism

      Qiu, Junyi; Yang, Bin; Sushko, Oleksandr; Pikersgill, Richard W.; Donnan, Robert S.; University of Chester (IEEE, 2014-12-08)
      Terahertz time domain spectroscopy (THz-TDS) was used to study the transmission responses of pH-dependent apomyoglobin (ApoMb) dissolved solutions in 0.2-2.2 THz frequency domain, the THz-TDS technique was also benchmarked against circular dichroism (CD) by studying pH-related folding states changes of ApoMb protein. Results revealed that differences of pH-dependent ApoMb/water dynamics can be detected directly by the THz refractive index spectrum, and these differences are further proved to be caused mainly the effect of protonation of water and possibly water response leaded by protein conformation change.
    • Controllability of buildings: computing and managing energy in practice

      Khalid, Yousaf; University of Chester (Journal of Computing and Management Studies (JCMS), 2018-05)
      Modern buildings utilise multiple systems for energy generation, supply and storage in order to maintain occupant comfort. Consequently, complex computer based energy management systems are utilised for design and operation of such buildings. Often these buildings perform poor in practice in terms of energy consumption, cost and carbon emissions due to lack of thorough analysis of their controllability during the design process. This paper highlights the deficiencies in the current building design practice and the need for appropriate framework to assess controllability of buildings during design stages so that complex building energy systems are easier to manage in practice.
    • DC-Link Voltage Coordinated-Proportional Control for Cascaded Converter with Zero Steady-State Error and Reduced System Type

      Tian, Yanjun; Loh, Poh C.; Deng, Fujin; Chen, Zhe; Hu, Yanting; 1. Department of Energy Technology, Aalborg University, Denmark; 2. Faculty of Science and Engineering, University of Chester, UK (IEEE, 2015-06-11)
      Cascaded converter is formed by connecting two sub-converters together, sharing a common intermediate DC-link voltage. Regulation of this DC-link voltage is frequently realized with a Proportional-Integral (PI) controller, whose high gain at DC helps to force a zero steady-state tracking error. Such precise tracking is however at the expense of increasing the system type, caused by the extra pole at the origin introduced by the PI controller. The overall system may hence be tougher to control. To reduce the system type while preserving precise DC-link voltage tracking, this paper proposes a coordinated control scheme for the cascaded converter, which uses only a proportional DC-link voltage regulator. The resulting converter is thus dynamically faster, and when compared with the conventional PI-controlled converter, it is less affected by impedance interaction between its two sub-converters. The proposed scheme can be used with either unidirectional or bidirectional power flow, and has been verified by simulation and experimental results presented in the paper.
    • Design and specification of building integrated DC electricity networks

      Stewart, M.; Counsell, M. J.; Al-Khaykan, A.; University of Chester (IEEE, 2017-01-19)
      Adoption of millions of small energy efficient, low power digital and DC appliances at home and at work is resulting in a significant and fast growing fraction of a building's electricity actually consumed in low voltage DC form. Building integrated energy systems featuring renewable photovoltaics are also increasingly attractive as part of an overall electricity and emissions reduction strategy. This paper details design and specification of a novel system level method of matching building integrated photovoltaic electricity generation with local low voltage DC appliances in office and other ICT intensive environments such as schools. The chosen scenario considers load components consisting of a diverse range of modern low power ICT and DC appliances, networked and powered by industry certified smart DC distribution technologies. Energy supply to the converged DC, IT and ICT network is described as featuring a roof-mounted or other on-site photovoltaic array in combination with conventional supply from the local grid infrastructure. The direct and strategic benefits of smart DC infrastructures are highlighted as the enabling technology for optimal demand reduction through fully integrated energy management of DC systems in buildings.
    • Effect of cell-size on the energy absorption features of closed-cell aluminium foams

      Nammi, Sathish K.; Edwards, Gerard; Shirvani, Hassan; Anglia Ruskin University, University of Chester, Anglia Ruskin University, (Elsevier, 2016-07-02)
      The effect of cell-size on the compressive response and energy absorption features of closed-cell aluminium (Al) foam were investigated by finite element method. Micromechanical models were constructed with a repeating unit-cell (RUC) which was sectioned from tetrakaidecahedra structure. Using this RUC, three Al foam models with different cell-sizes (large, medium and small) and all of same density, were built. These three different cell-size pieces of foam occupy the same volume and their domains contained 8, 27 and 64 RUCs respectively. However, the smaller cell-size foam has larger surface area to volume ratio compared to other two. Mechanical behaviour was modelled under uniaxial loading. All three aggregates (3D arrays of RUCs) of different cell-sizes showed an elastic region at the initial stage, then followed by a plateau, and finally, a densification region. The smaller cell size foam exhibited a higher peak-stress and a greater densification strain comparing other two cell-sizes investigated. It was demonstrated that energy absorption capabilities of smaller cell-size foams was higher compared to the larger cell-sizes examined.
    • Electromagnetic wave absorption properties of ternary poly (vinylidene fluoride)/magnetite nanocomposites with carbon nanotubes and graphene

      Tsonos, Christos; Soin, Navneet; Tomara, Georgia N.; Yang, Bin; Psarras, Georgios C.; Kanapitsas, Athanasios; Siores, Elias; University of Chester (Royal Society of Chemistry, 2015-12-21)
      Ternary nanocomposite systems of poly(vinylidene fluoride)/magnetite/carbon nanotube (PVDF/Fe3O4/CNT) and poly(vinylidene fluoride)/magnetite/graphene (PVDF/Fe3O4/GN), were prepared using high shear twin screw compounding followed by compression moulding. The electromagnetic (EM) microwave absorption properties of the nanocomposites were investigated in the frequency range of 3–10 GHz. PVDF/Fe3O4/CNT samples with the thickness d = 0.7 mm present a minimum reflection loss (RL) of −28.8 dB at 5.6 GHz, while all the RL values in the measurement frequency range 3–10 GHz are lower than −10 dB. PVDF/Fe3O4/GN with a thickness of 0.9 mm, presents a minimum RL of −22.6 dB at 5.4 GHz, while all the RL values in the measurement frequency range 3–10 GHz are lower than −10 dB as well. The excellent microwave absorption properties of both nanocomposites, in terms of minimum RL value and broad absorption bandwidth, are mainly due to the enhanced magnetic losses. The results indicate that the ternary nanocomposites studied here, can be used as an attractive candidate for EM absorption materials in diverse fields of various technological applications, not only in the frequency range 3–10 GHz, but also at frequencies <3 GHz for PVDF/Fe3O4/CNT and >10 GHz for PVDF/Fe3O4/GN with a realistic thickness of close to 1 mm.
    • Experimental demonstration of a transparent graphene millimetre wave absorber with 28% fractional bandwidth at 140 GHz

      Wu, Bian; Tuncer, Hatice M.; Naeem, Majid; Yang, Bin; Cole, Matthew T.; Milne, William I.; Hao, Yang; Queen Mary University of London (Nature Publishing Group, 2014-02-19)
      The development of transparent radio-frequency electronics has been limited, until recently, by the lack of suitable materials. Naturally thin and transparent graphene may lead to disruptive innovations in such applications. Here, we realize optically transparent broadband absorbers operating in the millimetre wave regime achieved by stacking graphene bearing quartz substrates on a ground plate. Broadband absorption is a result of mutually coupled Fabry-Perot resonators represented by each graphene-quartz substrate. An analytical model has been developed to predict the absorption performance and the angular dependence of the absorber. Using a repeated transfer-and-etch process, multilayer graphene was processed to control its surface resistivity. Millimetre wave reflectometer measurements of the stacked graphene-quartz absorbers demonstrated excellent broadband absorption of 90% with a 28% fractional bandwidth from 125-165 GHz. Our data suggests that the absorbers’ operation can also be extended to microwave and low-terahertz bands with negligible loss in performance.
    • Flicker mitigation strategy for a doubly fed induction generator by torque control

      Zhang, Yunqian Q.; Hu, Weihao; Chen, Zhe; Cheng, Ming; Hu, Yanting (IET, 2014-03)
      Owing to the rotational sampling of turbulence, wind shear and tower shadow effects grid connected variable speed wind turbines could lead to the power fluctuations which may produce flicker during continuous operation. A model of an megawatt (MW)-level variable speed wind turbine with a doubly fed induction generator is presented to investigate the flicker mitigation. Taking advantage of the large inertia of the wind turbine rotor, a generator torque control (GTC) strategy is proposed, so that the power oscillation is stored as the kinetic energy of the wind turbine rotor, thus the flicker emission could be reduced. The GTC scheme is proposed and designed according to the generator rotational speed. The simulations are performed on the national renewable energy laboratory 1.5 MW upwind reference wind turbine model. Simulation results show that damping the generator active power by GTC is an effective means for flicker mitigation of variable speed wind turbines during continuous operation. keywords: {asynchronous generators;oscillations;power generation control;torque control;wind power plants;wind turbines;GTC strategy;continuous operation;doubly fed induction generator;flicker emission;flicker mitigation strategy;generator active power;generator torque control;kinetic energy;megawatt-level variable speed wind turbine;power oscillation;tower shadow effects grid connected variable speed wind turbines;turbulence;upwind reference wind turbine model;variable speed wind turbines;wind shear;wind turbine rotor
    • Hybrid Heat Pump for Micro Heat Network

      Counsell, M. J.; Khalid, Yousaf; Stewart, M.; University of Chester (World Academy of Science, Engineering and Technology (WASET), 2017-10-17)
      Achieving nearly zero carbon heating continues to be identified by UK government analysis as an important feature of any lowest cost pathway to reducing greenhouse gas emissions. Heat currently accounts for 48% of UK energy consumption and approximately one third of UK’s greenhouse gas emissions. Heat Networks are being promoted by UK investment policies as one means of supporting hybrid heat pump based solutions. To this effect the RISE (Renewable Integrated and Sustainable Electric) heating system project is investigating how an all-electric heating sourceshybrid configuration could play a key role in long-term decarbonisation of heat. For the purposes of this study, hybrid systems are defined as systems combining the technologies of an electric driven air source heat pump, electric powered thermal storage, a thermal vessel and micro-heat network as an integrated system. This hybrid strategy allows for the system to store up energy during periods of low electricity demand from the national grid, turning it into a dynamic supply of low cost heat which is utilized only when required. Currently a prototype of such a system is being tested in a modern house integrated with advanced controls and sensors. This paper presents the virtual performance analysis of the system and its design for a micro heat network with multiple dwelling units. The results show that the RISE system is controllable and can reduce carbon emissions whilst being competitive in running costs with a conventional gas boiler heating system.
    • Impedance coordinative control for cascaded converter in bidirectional application

      Tian, Yanjun; Deng, Fujin; Chen, Zhe; Sun, Xiaofeng; Hu, Yanting; University of Chester (IEEE, 2015-06)
      Two stage cascaded converters are widely used in bidirectional applications, but the negative impedance may cause system instability. Actually the impedance interaction is much different between forward power flow and reversed power flow, which will introduce more uncertainty to the system stability. This paper proposes a control method for the constant power controlled converter in cascaded system, and consequently it can change the negative impedance of constant power converter into resistive impedance, which will improve the cascaded system stability, as well as merge the impedance difference between forward and reversed power flow. This paper addresses the analysis with the topology of cascaded dual-active-bridge converter (DAB) with inverter, and the proposed control method can also be implemented in unidirectional applications and other general cascaded converter system. The effectiveness has been validated by both simulation and experimental results.
    • Impedance interaction modeling and analysis for bidirectional cascaded converters

      Tian, Yanjun; Deng, Fujin; Chen, Zhe; Sun, Xiaofeng; Hu, Yanting (2015-06)
      For the cascaded converter system, the output impedance of source converter interacts with the input impedance of load converter, and the interaction may cause the system instability. In bidirectional applications, when the power flow is reversed, the impedance interaction also varies, which brings more uncertainty to the system stability. An investigation is performed here for showing that the forward and reverse interactions are prominently different in terms of dynamics and stability even though the cascaded converter control remains unchanged. An important guideline has been drawn for the control of the cascaded converter. That is when voltage mode converter working as the load converter; the constant power mode converter as the source converter, the system is more stable. The concluded findings have been verified by simulation and experimental results.
    • Micromachined Thick Mesh Filters for Millimeter-Wave and Terahertz Applications

      Wang, Yi; Yang, Bin; Tian, Yingtao; Donnan, Robert S.; Lancaster, Michael J.; University of Bolton (IEEE, 2014-03-01)
      This paper presents several freestanding bandpass mesh filters fabricated using an SU-8 based micromachining technique. The important geometric feature of the filters, which SU8 is able to increase, is the thickness of the cross-shaped micromachined slots. This is 5 times its width. This thickness offers an extra degree of control over the resonance characteristics. The large thickness not only strengthens the structures, but also enhances the resonance quality factor (Q-factor). A 0.3 mm thick, single layer, mesh filter resonant at 300 GHz has been designed, fabricated and its performance verified. The measured Q-factor is 16.3 and the insertion loss is 0.98 dB. Two multi-layer filter structures have also been demonstrated. The first one is a stacked structure of two single mesh filters producing a double thickness, which achieved a further increased Q-factor of 27. This is over six times higher than a thin mesh filter. The second multi-layer filter is an electromagnetically coupled structure forming a two-pole filter. The coupling characteristics are discussed based on experimental and simulation results. These thick mesh filters can potentially be used for sensing and material characterization at millimeter-wave and terahertz frequencies.
    • Microwave and terahertz dielectric properties of MgTiO3–CaTiO3 ceramics

      Huang, J. B.; Yang, Bin; Yu, Chuying; Zhang, Guang; Xue, Hao; Xiong, Zhaoxian; Viola, Giuseppe; Donnan, Robert S.; Yan, Haixue; Reece, Mike J.; College of Materials; Queen Mary University of London (Elsevier, 2015-10-05)
      The THz dielectric properties of MgTiO3–CaTiO3 ceramics are reported. The ceramics were prepared via a solid-state reaction route and the sintering conditions were optimized to obtain ceramics with high permittivity and low loss in the terahertz frequency domain. The amount of impurities (MgTi2O5) and grain size increased with increasing sintering temperature. The dielectric properties improved with increasing density, and the best terahertz dielectric performance was obtained at 1260 °C, with a permittivity of 17.73 and loss of 3.07×10−3. Ceramics sintered above 1260 °C showed a sharp increase in loss, which is ascribed to an increase in the impurity content.
    • Perovskite Srx(Bi1-xNa0.97-xLi0.03)0.5TiO3 ceramics with polar nano regions for high power energy storage

      Wu, Jiyue; Mahajan, Amit; Riekehr, Lars; Zhang, Hangfeng; Yang, Bin; Meng, Nan; Zhang, Zhen; Yan, Haixue; Queen Mary University of London; Uppsala University; University of Chester (Elsevier, 2018-06-06)
      Dielectric capacitors are very attractive for high power energy storage. However, the low energy density of these capacitors, which is mainly limited by the dielectric materials, is still the bottleneck for their applications. In this work, lead-free single-phase perovskite Srx(Bi1-xNa0.97-xLi0.03)0.5TiO3 (x=0.30 and 0.38) bulk ceramics, prepared using solid-state reaction method, were carefully studied for the dielectric capacitor application. Polar nano regions (PNRs) were created in this material using co-substitution at A-site to enable relaxor behaviour with low remnant polarization (Pr) and high maximum polarization (Pmax). Moreover, Pmax was further increased due to reversible electric field induced phase transitions. Comprehensive structural and electrical studies were performed to confirm the PNRs and the reversible phase transitions. And finally a high energy density (1.70 J/cm3) with an excellent efficiency (87.2%) was achieved using the contribution of PNRs and field-induced transitions in this material, making it among the best performing lead-free dielectric ceramic bulk material for high energy storage.
    • The power of VNA-driven quasi-optics to sense group molecular action in condensed phase systems

      Donnan, Rob; Tian, Kun V.; Yang, Bin; Chass, Gregory. A.; University of Chester (2014-12-08)
      The versatility for quasi-optical circuits, driven by modern vector network analysers, is demonstrated for the purpose of low energy (meV) coherent spectroscopy. One such example is shown applied to the curing dynamics of a non-mercury-based dental cement. This highlights the special place the methodology holds as a `soft-probe' to reveal the time-resolved energetics of condensed phased systems as they self-organise to adopt their low energy state.
    • Power System with Variable Speed Wind Turbine and Diesel Generation Units

      Hu, Yanting; Chen, Zhe; Glyndwr; Aalborg University (EER, 2014-01-20)
      Thispaper presents a power system consisting of wind turbines, diesel generation units, and energy storage system. Both wind turbines and diesel engine adopt variable speed operation mode;and power electronic interface are used for the generation units which provide flexible and wide range of control on the power. The system configuration, characteristics, operation principles are presented. The controller and control strategies are discussed. The simulation studies have been performed and the results are presented.