Browsing Faculty of Science and Engineering by Authors
Comparative Potential of Natural Gas, Coal and Biomass Fired Power Plant with Post - combustion CO2 Capture and CompressionAli, Usman; Font Palma, Carolina; Akram, Muhammad; Agbonghae, Elvis O.; Ingham, Derek B.; Pourkashanian, Mohamed; University of Sheffield, University of Chester, Nigerian National Petroleum Corporation (Elsevier, 2017-06-07)The application of carbon capture and storage (CCS) and carbon neutral techniques should be adopted to reduce the CO2 emissions from power generation systems. These environmental concerns have renewed interest towards the use of biomass as an alternative to fossil fuels. This study investigates the comparative potential of different power generation systems, including NGCC with and without exhaust gas recirculation (EGR), pulverised supercritical coal and biomass fired power plants for constant heat input and constant fuel flowrate cases. The modelling of all the power plant cases is realized in Aspen Plus at the gross power output of 800 MWe and integrated with a MEA-based CO2 capture plant and a CO2 compression unit. Full-scale detailed modelling of integrated power plant with a CO2 capture and compression system for biomass fuel for two different cases is reported and compared with the conventional ones. The process performance, in terms of efficiency, emissions and potential losses for all the cases, is analysed. In conclusion, NGCC and NGCC with EGR integrated with CO2 capture and compression results in higher net efficiency and least efficiency penalty reduction. Further, coal and biomass fired power plants integrated with CO2 capture and compression results in higher specific CO2 capture and the least specific losses per unit of the CO2 captured. Furthermore, biomass with CO2 capture and compression results in negative emissions.
Experimental and process modelling study of integration of a micro-turbine with an amine plantAgbonghae, Elvis O.; Best, Thom; Finney, Karen N.; Font Palma, Carolina; Hughes, Kevin J.; Pourkashanian, Mohamed; University of Leeds (Elsevier, 2014-12-31)An integrated model of a micro-turbine coupled to a CO2 capture plant has been developed with Aspen Plus, and validated with experimental data obtained from a Turbec T100 microturbine at the PACT facilities in the UKCCS Research Centre, Beighton, UK. Monoethanolamine (MEA) was used as solvent and experimental measurements from the CO2 capture plant have been used to validate the steady-state model developed with Aspen Plus®. The optimum liquid/gas ratio and the lean CO2 loading for 90% CO2 capture has been quantified for flue gases with CO2 concentrations ranging from 3 to 8 mol%.