Loading...
Interface Cohesive Elements to Model Matrix Crack Evolution in Composite Laminates
Shi, Yu Pinna, Christophe Soutis, Constantinos
Shi, Yu
Pinna, Christophe
Soutis, Constantinos
Citations
Altmetric:
Advisors
Editors
Other Contributors
EPub Date
Publication Date
2013-10-02
Submitted Date
Collections
Files
Loading...
ACMA-D-13-00409_R1.pdf
Adobe PDF, 1.56 MB
Other Titles
Abstract
In this paper, the transverse matrix (resin) cracking developed in multidirectional composite laminates loaded in tension was numerically investigated by a finite element (FE) model implemented in the commercially available software Abaqus/Explicit 6.10. A theoretical solution using the equivalent constraint model (ECM) of the damaged laminate developed by Soutis et al. was employed to describe matrix cracking evolution and compared to the proposed numerical approach. In the numerical model, interface cohesive elements were inserted between neighbouring finite elements that run parallel to fibre orientation in each lamina to simulate matrix cracking with the assumption of equally spaced cracks (based on experimental measurements and observations). The stress based traction-separation law was introduced to simulate initiation of matrix cracking and propagation under mixed-mode loading. The numerically predicted crack density was found to depend on the mesh size of the model and the material fracture parameters defined for the cohesive elements. Numerical predictions of matrix crack density as a function of applied stress are in a good agreement to experimentally measured and theoretically (ECM) obtained values, but some further refinement will be required in near future work.
Citation
Shi, Y., Pinna, C., Soutis, C. (2014). Interface cohesive elements to model matrix crack evolution in composite laminates. Applied Composite Materials, 21(1), 57–70
Publisher
Springer
Journal
Applied Composite Materials
Research Unit
PubMed ID
PubMed Central ID
Type
Article
Language
en
Description
Series/Report no.
ISSN
0929-189X
EISSN
1573-4897